AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Cement plaster8/26/2023 A dot means a patch of plaster of size 15 mm * 15 mm and having a thickness of about 10 mm. In order to get the uniform thickness of plastering throughout the wall surface, first, fix dots on the wall.Step-2 (Basic Ground work before plastering) Wash the mortar joints and entire wall to be plastered, and keep it wet for at least 6 hours before applying cement plaster.Roughen the entire wall to be plastered.If there exist any cavities or holes on the surface, then fill it in advance with appropriate material.This will reduce the consumption of plaster. If the projection on the wall surface is more than 12 mm, then knock it off, so as to obtain a uniform surface of the wall.If the surface is smooth or the wall to be plastered is old, then rake out the mortar joint to a depth of at least 12 mm to give a better bonding to the plaster.Clean all the joints and surfaces of the wall with a wire brush, there should be no oil or grease, etc.Keep all the mortar joints of the wall rough, so as to give a good bonding to hold plaster.Step-1 (Preparation of the wall surface for plastering) Step-4-Applying second coat or the topcoat.Step-3-Applying the first coat or the base coat.Step-2-Basic groundwork before plastering.Step-1-Preparation of the wall surface for plastering.Step By Step How To Cement Plaster Wall Surface The article below suggests in 4 Steps How To Cement Plaster Wall Surface. Double coat plaster is applied where the thickness of plaster is required to be more than 15 mm or when it is required to get a very fine finish. Cement plaster is usually applied in a single coat or double coat. Cement plastering is commonly used as an ideal coating for the external and internal surfaces of the wall.
0 Comments
Read More
Leave a Reply. |